$ 160.00
This is a straight grip stock for the commercial rolling block. IT WILL NOT FIT A MILITARY ACTION. Commercial actions are relatively rare, and if your frame is wider than 1.25" or the tangs are wider than .635" then you have a military action and should look at this stock.
Check the following measurements carefully against your rifle, these items are made to order and are NOT returnable.
|
|
This stock: Rem #1 sporting rifle plate |
||
|
Frame width |
1.17” |
1.25” |
1.4” or 1.5" |
|
Frame height |
1.65” |
1.70” |
4.75” |
|
Upper tang length |
3.32” |
3.25” |
3.4” |
|
Upper tang width |
.59”-.53” |
.59”-.53” |
.68”-.60” |
|
Lower tang length |
3.32” |
4.42” |
3.4” |
|
Lower tang width |
.64"-.54” |
.62”-.53” |
.72-.64” |
|
Buttplate height |
4.1” |
5.1” |
5.1” |
If you have something that does not match up perfectly, select the one with enough wood, i.e. larger frame and smaller tang inletting. Extra wood will need to be removed by you or your gunsmith.
Buttstock is 98% shaped and inlet, expect .060" extra on outer surfaces and tangs inlet within .020".
These products are made to order at our shop in Pennsylvania. Delivery time is typically about a month.
| Grip | Straight |
| Cheekpiece | None |
| Drop at comb | |
| Drop at heel | |
| LOP (standard) | |
| Buttplate | Remington early rifle plate (not avalable) |
| Wood requirements | 2" thick blank |
| Stock bolt | None |
| Suitable forearms | Remington rolling block |
